Chisel Dimensions

There are many chisel dimensions and sizes, and it isn’t uncommon for products to have different sized blades in one box. Some of the most common sizes are the ½ inch, ¾ and 1 inch blade. There are also some bigger chisel blades available.

How to Use the Chisel

Step 1

Clamp the work piece so it remains steady. Make sure your feet are planted firmly on the floor.

Step 2

Position the bevel. If you are making convex curves and deep cuts, set the chisel with the bevel side up. If you are going to make fine shaving, set the chisel with the bevel side down. This position is also ideal for work in tight spaces.

Step 3

With the chisel at 45 degrees, tap it lightly. Make sure the chisel isn’t pointing towards you. Chisel across, and then with the grain.


No matter what the chisel dimensions are, do not use it for prying objects. Do not use the wood chisel on metal objects.

Other Information about Chisels

The chisel is a tool with a sharp beveled edge. It is used for shaping, gouging and cutting. They are utilized in metalworking, stone working and woodworking. The chisel is also used in arts and crafts.

There are many kinds of chisels, including beginner tools. Small and light chisels are used for adding detail to woodwork, while the larger ones are utilized for shaping cold metals. Using the wrong chisel can break the stone so artists are very careful in their selection.

Chisels are widely used in woodworks as they can add details. They can also be used for roughing out slots that will be joined together. To be used effectively, the chisel must be taken care of. These can be placed in insulating materials or a toolbox. Some even design cabinets just for the tool.

Chisels can be made from different materials, with steel being one of the most widely used. The advantage of using steel is that it is resistant to corrosion and resilient.

The handle can also be made from steel, but other materials like wood can be used. There are also chisels with plastic handles. There are also chisels where the handle is part of the tool.

Owing to the chisel dimensions differences, it is imperative that one understands the tool specs and what it can do. This is the best way to ascertain you have the right tool for the job. mistakes must be avoided.

Similar Posts