Ever get an idea in your head when viewing a building plan about how tall the building would actually be? Maybe there’s a document that says 80 feet, and you want to visualize it. When they come across a zoning rule, they are planning a project or just curious, many people ask how many floors is 80 feet.
It has approximately 8 floors. This number is based on an average floor elevation of 10ft. There is no right solution – real buildings are variable.
Easy math, common floor heights and some practical examples will be found. You will also get to know how 80 feet is used in codes.
How many feet of floors will be covered by 80 ft?
In most cases, 80′ is about the height of 8 floors, consult your local fire code to find out. The rule is very simple: 80 / height of one floor. Each floor will be 10 feet tall, so there will be 8 floors. For a skyscraper, see how many stories is 300 ft.
But, not all floors are 10-feet. Often homes have short floors. Taller ones are commonly used in office buildings. As it depends on the type of building, the number of floors is around 6 to 10 (the answer).
What is meant by ‘floor height’?
The height of the floor is measured from the top of one floor to the top of the next. This is known as the builders height and is floor to floor.
Consists of the room height as observed inside the room. It covers also the room above the ceiling for the floor structure, electric wiring, air ducting and pipes.
Why that is, is that is a 9′ or 10′ tall floor will normally have an 8′ ceiling room. The hidden space is added up. When asking how many floors is 80 ft, it is best to use the height of the floor-to-floor height to get the closest answer.
What does 80 ft equal in floor heights?
The math is easy. Use this formula:
No of floors = Total height/Floor to Floor height
A few examples are given for a height of 80 feet.
8 feet per floor: 10 floors
8.9 floors: about 9ft per floor
Multiply 10 by 8 floors = 80 feet.
The number of floors is approximately equal to 5.7 floors per 14 feet.
For complete floors, round down. For example, 80 feet and 12-foot floors represents 6 floors plus just under a floor.
Average floor heights from building typologies
The height of the floors differ from building to building. These are only guidelines, not rules:
Houses and apartments: approximately 9-10 feet per floor
Restaurants: about 8-9 feet per floor
Areas adjacent to buildings: approximately 10 feet per area
Typical commercial building: 40 feet per storey
Depending on design factors, local codes and building age, these numbers will also be different. Unless you have the plans, always consider them estimates.
80 Feet in a Home or Apartment Building
Typically, eight or nine floors is the equivalent of 80 feet in residential buildings. A floor of an apartment block is 10 ft high then the number of floors is 8. The 9′ tall height allows 8 full floors, and then some room for a roof or for equipment.
Roofs matter, too. Building height may be to the roof, parapet or the highest point of the building as per the local rules. The small detail is what will make a difference in the number of floors you are expecting. A lower height is covered in how high is 40 feet.
The question of how many floors is 80 feet on a single-family home – well, that’s a question I think in most cases is more of a theoretical question. Typically the houses are two or three stories tall, and an 80′ house would be very unusual.
How many floors is 80 feet in an Office or Commercial Building
Typically, office buildings have higher floors. This additional elevation provides for the air duct, electric light and wiring. 12′ floors is approximately 6 floors at 80′. It provides approximately 5 floors and some height in 14 foot floors.
The lobby or ground level could be even taller. If the height of the first floor of a house is 18 ft and 62 ft of the rest will be used for 1 floor, how many floors will be 62 ft of the house? A frequent reason for the answer of “80 ft” being less for commercial buildings.
So what exactly is a high-rise?
Not always. Countries, cities and codes have a different definition.
In general, high-rise buildings are considered those that have an occupied floor above 75 feet of the lowest floor where the fire department can access the building by vehicle. A rule takes into account the elevation of the highest floor and not the roof.
Within an 80-foot building, the top floor that is occupied, could be roughly 70 feet up, and that could be just below. If you think of how many stories are 80 feet in code terms, that’s dependent on the height of the roof level. Please refer to local rules at all times.
Real-Life Comparisons for 80 Feet
When using pictures, it is helpful to visualize the numbers. Here are some comparisons of 80 feet to see how many floors is 80 feet tall in real life:
A regulation basketball rim is 10 feet high. They will be 8 feet tall if 8 are put together.
A bowling lane is about 60 feet from the foul line to the head pin. Therefore, 80 feet is longer than that. You can also read how tall is 80 ft.
An NBA basketball court is 94 ft. long. A full court is about 80 feet in length.
The first one is simple, as is the answer: 10 x 8 = 80 feet.
80 Feet in Other Units
For some readers, the height needs to be expressed in other units. This is a very useful conversion table:
80 feet equals 960 inches
There are approximately 26.67 yards in 80 feet.
There are approximately 24.38 meters in 80 feet.
Alternatively, if you’d rather measure floor heights in meters, then most of the time a 3m floor is used. That would give a little more than 8 floors, if there are 24.38m and 3m per floor! Thus the meter reading is almost the same as the 10 foot reading. National Geographic covers the history of imperial and metric measurement if you want to know where feet come from.
What is the reason for such a question?
Units are thought in feet and buildings are often written in feet. A limit of 80 feet may be stated in a planning document. A listing may mention the selling price of a home in feet.Safety guide can include a guide to working at height.
These numbers are easier to understand if they’re looked at as feet per floor. It also aids in comparing buildings or in planning a project or in reading a local height limit.
Common Mistakes When Estimating Floors
Errors can be caused by a simple question. Be alert to these errors:
Eliminating floor to ceiling height measurements. The ceiling height is also not as high as the ceiling height of the floor.
Not considering the height of the ground floors. Typically, the lobbies and shops require more space.
Forgetting roof structures. The height can be obtained from mechanical rooms or parapets.
Equating all buildings. Not all offices, houses and garages are the same.
A combination of the floor naming rules. The second floor is typically called the ground floor in the U.S. In the UK and elsewhere, the ground floor is a distinct level with the first floor as the one above.
The latter is key. An 8 level building might be referred to as 8 floors in one country and ground and seven floors in another.
Some guidelines on how to get an accurate answer
A pretty good estimate will suffice, but plans designed precisely will yield the best results. Follow these steps:
Check out building plans, or check out architect’s plans.
Ask people for the height of the floor, NOT the ceiling.
Repeat the measurement point and end.
Use 10 feet for a quick home estimate, and 12-14 feet for the office.
The number of floors it will contain will vary by building, but if someone says it, then they’re correct. Always the most accurate estimate is from the actual height of the real floor.
Final Thoughts
Then, how many floors is 80 feet? The most basic solution is about 8 floors, and 10 feet per floor. Apartments, houses may be 8 or 9 floors and office buildings may be 5 or 6.
The height from the floor to the floor is important and called the key. If you divide 80 by that number, you’ll have an idea of the answer. Note that this number may vary depending on the roof, and if there is a lobby, or local naming rules.
When the next time you’re asked about how many floors are 80 feet, you’ll be able to reply with assurance: roughly 8 floors in a typical building, and fewer in commercial buildings with more floors. When it is a particular number, always use the building plans.
FAQs
In a normal building, how many floors is 80 feet?
Normal buildings have 10 foot floors, so 80 feet would be 8 floors. If all the floors are 9 feet high, then you may be able to get 8 full floors and a bit of top height.
How many floors will there be in an office building that is 80 feet high?
Office floors are approximately 12 to 14 feet above when the building is 80 feet tall, this is approximately 5 to 6 floors. The number can be further decreased with a tall lobby.
Is 80 feet = 10 floors?
Yes, but not unless the floors are about 8 feet high. This sort of height is near to floor to floor, and seldom seen in any typical modern building.
What would you call it if it were 80 feet tall?
It is subject to the local code. In the International Building Code (IBC) the key line is considered an occupied floor more than 75 ft above the fire department access. This line may or may not be reached by an 80 foot building.
What is the conversion of feet to meters of 80 feet?
80 feet is about 24.38 meters. If it’s 3m per floor, that would be just over 8 floors.