For cup holder, cooler, packaging, display or storage (or just for comparison), it’s best to start with the standard 250 mL red bull can. The iconic Red Bull can is a thin aluminum can that is approximately 5.24″ (13.3 cm) tall by 2.09″ (5.3 cm) in diameter.
The small diameter is what makes the can recognizable and familiar. Red Bull also comes in bigger cans, so this will depend on the size you are measuring.
Red Bull Can Dimensions At A Glance
The most helpful measurements for the standard 250 mL Red Bull can are:
- Height: about 5.24 inches or 13.3 cm
- Diameter: about 2.09 inches or 5.3 cm
- Radius: about 1.04 inches or 2.65 cm
- Circumference: about 6.56 inches or 16.65 cm
- Capacity: 250 mL or 8.4 US fl oz
These numbers can be helpful in estimating the space on a shelf, designing a can holder, making a sleeve, or comparing the can to another beverage container. Using the formula, circumference is determined by multiplying the 53 mm diameter by π.
Red Bull Can Size And Dimension Fact Table
| Red Bull can size | Capacity | Approx. height | Approx. diameter | Best reference |
| Classic Slim | 250 mL / 8.4 oz | 5.24 in / 13.3 cm | 2.09 in / 5.3 cm | Standard can |
| Medium | 355 mL / 12 oz | Varies by format | Varies by format | Check the specific market |
| Large | 473 mL / 16 oz | Varies by format | Varies by format | Check the specific market |
| Extra Large | 591 mL / 20 oz | Varies by format | Varies by format | Check the specific market |
Note: Red Bull sizes and exterior dimensions may differ depending on market and format. Red Bull also has region-specific products. If the holder or packaging needs to be tightly fitted, take a measurement of the can that will be used instead of just a general size.
What Are The Standard Red Bull Can Dimensions?
The height of a classic 250mL Red Bull can is about 133mm and the diameter is 53mm. That’s a height of approximately 5.24 inches and a width of 2.09 inches.
The height is that from the bottom of the can to the top. Diameter is the distance across the cylinder as measured perpendicular to its axis.
This is important when designing something around the can. Even the tallest container can be too small if it’s not wide enough. Similarly, a holder that has a large opening might not support the thin can.
The 250 mL version is significantly thinner than some of the 355 mL conventional soda cans. The difference is easy to observe when you compare the two cans.
Red Bull Can Dimensions In Inches
The standard 250 mL can is about:
The plant is 5.24″ tall and 2.09″ in diameter.
For general projects, the measurements could be rounded to 5.25 × 2.1 inches.
Do not design the opening to be exactly 2.09 inches in size when making a box, sleeve, organizer or holder. Actual fit may vary due to manufacturing tolerances and can end shapes. Typically a bit of clearance is easier to deal with.
When the storage compartment is loose, rounding up is usually sufficient. If you want to use a custom insert/holder, measure the physical can first.
Red Bull Can Dimensions In CM And MM
Often it is easier to use metric measurements when packaging and manufacturing.
The standard size of the Red Bull can is about:
- Height: 13.3 cm
- Diameter: 5.3 cm
- Height: 133 mm
- Diameter: 53 mm
- Radius: 2.65 cm
- Radius: 26.5 mm
The circumference is approximately 16.65 cm or 166.5 mm when calculated from the 53 mm diameter.
In general design projects, 133 mm × 53 mm is helpful as a design aid.
How Tall Is A Red Bull Can?
The height of a standard 250 mL Red Bull can is about 5.24 inches or 13.3 cm tall.
Depending on the measurement source, the overall can may appear to be different in size online because it may be measuring the can body or different manufacturing specifications. Red Bull is available in various sizes and the height of each size is different.
When determining if a Red Bull can will fit inside a refrigerator shelf, vending machine space, bag compartment or drink holder, use the dimensions of the actual can size you plan to use.
At least 13.5 cm of vertical clearance will leave you with a little room to work with a standard 250 mL can, instead of creating a design based on 13.3 cm.
What Is The Diameter Of A Red Bull Can?
The diameter of the standard 250 mL Red Bull can is roughly 53 mm or 2.09 inches in diameter.
Circular holders are particularly critical in this regard. This includes:
- Car cup holders
- Can coolers
- Refrigerator compartments
- Bottle and can organizers
- Vending machine slots
- Custom packaging
- Product displays
- Desk organizers
One of the reasons why the classic Red Bull can feels different from a typical soda can is because of its slim diameter.
Why Do Red Bull Cans Have A Slim Shape?
The narrow can format offers another grip and requires a relatively small amount of horizontal space.
A thin can can also be used successfully in space that is narrow. Rather than making the can wider as much as possible, larger beverage formats can accommodate more capacity by adopting a new can format or by increasing the can’s height.
That is why it is not sufficient to know the volume to determine the physical dimensions.
There are two possibilities for the capacity of each can: either 250 mL or 355 mL, and both can have different heights and diameters.
Red Bull Can Sizes Compared
Red Bull comes in various sizes, particularly in the U.S. market. The standard sizes are 8.4 oz, 12 oz, 16 oz and 20 oz but availability depends on location.
The 8.4 oz can is the more common slim size can. Large cans take up more space, however, the outside dimensions of the can vary from different can designs and markets.
If you need to measure Red Bull cans for storage or packaging purposes, then it’s crucial. Don’t think that a higher capacity can is just a tall can.
Will A Red Bull Can Fit In A Cup Holder?
The diameter of the standard 250 mL can of Red Bull is approximately 2.09 inches (5.3 cm).
Whether it’s snugly fits or not depends on the cup holder.
Numerous cup holders on vehicles are intended for wider drinks holders. Can fit into thin can, but moves sideways a bit. Use of a can sleeve or insert will help to create a tighter fit.
If you’re making your own cup holder, measure the can as well as the hole for the cup. Never use the capacity printed on the can.
Red Bull Can Dimensions For Packaging And Design
When designing packaging for a 250 mL Red Bull can, use the approximate value of 133 mm (height) and 53 mm (diameter) as a starting point.
These figures should be used as reference sizes, however, and not as a replacement for an actual measurement.
When fitted, consider the following:
- Can diameter
- Overall height
- Top and bottom construction
- Manufacturing tolerance
- Material thickness
- Required clearance
- How the can will be inserted and removed
A box that is the same size as the can will typically be too small. The final design is not only more practical, but also a bit less cluttered when there is a little bit of clearance.
How To Measure A Red Bull Can Yourself
Step 1: Set can on a level surface.
Step 2: Measure from the bottom of the can to the top.
Step 3: To determine the diameter, measure straight across the widest part of the cylindrical body.
Step 4: If circumference is desired, use a flexible measuring tape around body. It can also be calculated using:
Circumference = π × diameter
The circumference of a circle is approximately 166.5 mm when the diameter is 53 mm.
If you are making a precision part, a digital caliper will be more accurate.
Why Red Bull Can Measurements Vary Online
You may find different dimensions to search for red bull. This doesn’t necessarily imply that one source is incorrect.
It may be caused by one or more of the following:
- Different can sizes
- Different countries
- Different manufacturers
- The diameter of a body in relation to the largest outside diameter
- The overall height and body height.
- Different measurement methods
- Convert measurements from millimeters to inches.Convert lengths from mm to inches.
As a general guideline, the slim can, 250 mL, standard of approximately 133 mm × 53 mm is a good point of reference.
If you are working on a precise engineering or packaging job, however, take the actual can’s dimensions.
Final Thoughts
The most important red bull can dimensions to keep in mind for most searches is the classic, 250 mL, can which measures approximately 133 mm tall and 53 mm in diameter, or 5.24 × 2.09 inches.
These measurements suffice for simple comparisons, planning of storage, and basic design. When making a fitted holder, sleeve, package or mechanical part, use the special can you will be putting it into. Variations in manufacturing and can size may impact fit.
The easiest guideline to follow is to first determine the can size, then measure the actual can if the fit has to be exact.
FAQs:
What are the standard Red Bull can dimensions?
The classic 250 mL Red Bull can is approximately 5.24 inches (13.3 cm) tall and 2.09 inches (5.3 cm) in diameter.
How tall is a 250 mL Red Bull can?
A 250 mL Red Bull can is about 13.3 cm or 5.24 inches tall.
What is the diameter of a 250 mL Red Bull can?
The diameter is approximately 53 mm, 5.3 cm, or 2.09 inches.
What are Red Bull can dimensions in inches?
For the classic 250 mL can, the dimensions are approximately 5.24 inches high × 2.09 inches in diameter.
What are Red Bull can dimensions in centimeters?
The standard 250 mL format is approximately 13.3 cm high × 5.3 cm in diameter.
